Register training material
14 materials found

Keywords: fish  or Galaxy Australia 


WORKSHOP: Online data analysis for biologists

This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021.

Workshop description

Galaxy is an online platform for biological research that allows people to use computational data...

Keywords: Bioinformatics, Analysis, Workflows, Galaxy Australia

WORKSHOP: Online data analysis for biologists https://dresa.org.au/materials/workshop-online-data-analysis-for-biologists-08d66913-4ce3-4528-bdd6-0b0fcf234982 This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021. Workshop description Galaxy is an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. It is an open source, web-based platform for accessible, reproducible, and transparent computational biomedical research. It also captures run information so that workflows can be saved, repeated and shared efficiently via the web. This interactive beginners workshop will provide an introduction to the Galaxy interface, histories and available tools. The material covered in this workshop is freely available through the Galaxy Training Network. The workshop will be held via Zoom and involves a combination of presentations by the lead trainer and smaller breakout groups supported by experienced facilitators. The materials are shared under a Creative Commons 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Schedule (PDF): schedule for the workshop Online_data_analysis_for_biologists_extraslides (PPTX and PDF): Slides used to introduce the data set and emphasise the importance of workflows. These slides were developed by Ms Grace Hall. Materials shared elsewhere: The tutorial used in this workshop is available via the Galaxy Training Network. Anne Fouilloux, Nadia Goué, Christopher Barnett, Michele Maroni, Olha Nahorna, Dave Clements, Saskia Hiltemann, 2021 Galaxy 101 for everyone (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/introduction/tutorials/galaxy-intro-101-everyone/tutorial.html Online; accessed Fri Dec 10 2021 Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Analysis, Workflows, Galaxy Australia
WEBINAR: Where to go when your bioinformatics outgrows your compute

This record includes training materials associated with the Australian BioCommons webinar ‘Where to go when your bioinformatics outgrows your compute’. This webinar took place on 19 August 2021.

Bioinformatics analyses are often complex, requiring multiple software tools and specialised compute...

Keywords: Computational Biology, Bioinformatics, High performance computing, HPC, Galaxy Australia, Nectar Research Cloud, Pawsey Supercomputing Centre, NCI, NCMAS, Cloud computing

WEBINAR: Where to go when your bioinformatics outgrows your compute https://dresa.org.au/materials/webinar-where-to-go-when-your-bioinformatics-outgrows-your-compute-7a5a0ff8-8f4f-4fd0-af20-a88d515a6554 This record includes training materials associated with the Australian BioCommons webinar ‘Where to go when your bioinformatics outgrows your compute’. This webinar took place on 19 August 2021. Bioinformatics analyses are often complex, requiring multiple software tools and specialised compute resources. “I don’t know what compute resources I will need”, “My analysis won’t run and I don’t know why” and "Just getting it to work" are common pain points for researchers. In this webinar, you will learn how to understand the compute requirements for your bioinformatics workflows. You will also hear about ways of accessing compute that suits your needs as an Australian researcher, including Galaxy Australia, cloud and high-performance computing services offered by the Australian Research Data Commons, the National Compute Infrastructure (NCI) and Pawsey.  We also describe bioinformatics and computing support services available to Australian researchers.  This webinar was jointly organised with the Sydney Informatics Hub at the University of Sydney. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Where to go when your bioinformatics outgrows your compute - slides (PDF and PPTX): Slides presented during the webinar Australian research computing resources cheat sheet (PDF): A list of resources and useful links mentioned during the webinar. Materials shared elsewhere: A recording of the webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/hNTbngSc-W0 Melissa Burke (melissa@biocommons.org.au) Computational Biology, Bioinformatics, High performance computing, HPC, Galaxy Australia, Nectar Research Cloud, Pawsey Supercomputing Centre, NCI, NCMAS, Cloud computing
WEBINAR: Here's one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia

This record includes training materials associated with the Australian BioCommons webinar ‘Here’s one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia’. This webinar took place on 26 October 2022.

Event description 

Have you discovered a brilliant...

Keywords: Bioinformatics, Workflows, FAIR, Galaxy Australia

WEBINAR: Here's one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia https://dresa.org.au/materials/webinar-here-s-one-we-prepared-earlier-re-creating-bioinformatics-methods-and-workflows-with-galaxy-australia-134a8bf5-3801-421f-a454-e0f9020f4871 This record includes training materials associated with the Australian BioCommons webinar ‘Here’s one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia’. This webinar took place on 26 October 2022. Event description  Have you discovered a brilliant bioinformatics workflow but you’re not quite sure how to use it? In this webinar we will introduce the power of Galaxy for construction and (re)use of reproducible workflows, whether building workflows from scratch, recreating them from published descriptions and/or extracting from Galaxy histories. Using an established bioinformatics method, we’ll show you how to: Use the workflows creator in Galaxy Australia  Build a workflow based on a published method Annotate workflows so that you (and others) can understand them  Make workflows finable and citable (important and very easy to do!) Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. GalaxyWorkflows_Slides (PDF): A PDF copy of the slides presented during the webinar. Materials shared elsewhere: A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/IMkl6p7hkho Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Workflows, FAIR, Galaxy Australia
WEBINAR: Conservation genomics in the age of extinction

This record includes training materials associated with the Australian BioCommons webinar ‘Conservation genomics in the age of extinction’. This webinar took place on 8 March 2022.

Event description 

Biodiversity is crashing and millions of plant and animal species are at the edge of...

Keywords: Conservation genomics, Genomics, Bioinformatics, Sequencing, Threatened Species Initiative, Galaxy Australia

WEBINAR: Conservation genomics in the age of extinction https://dresa.org.au/materials/webinar-conservation-genomics-in-the-age-of-extinction-c7718a53-68ee-4c69-adf4-cd0550710d3f This record includes training materials associated with the Australian BioCommons webinar ‘Conservation genomics in the age of extinction’. This webinar took place on 8 March 2022. Event description  Biodiversity is crashing and millions of plant and animal species are at the edge of extinction. Understanding the genetic diversity of these species is an important tool for conservation biology but obtaining high quality genomes for threatened species is not always straightforward. In this webinar Dr Carolyn Hogg speaks about the work she has been doing with the Threatened Species Initiative to build genomic resources to understand and protect Australia’s threatened species. Using examples such as the Kroombit Tinker Frog and the Greater Bilby, Carolyn describes some of the complexities and challenges of generating genomes from short reads and HiFi reads for critically endangered species. She outlines the technologies and resources being used and how these are bridging the gap between genomicists, bioinformaticians and conservation experts to help save Australian species. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Materials shared elsewhere: A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/Bl7CaiGQ91s   Melissa Burke (melissa@biocommons.org.au) Conservation genomics, Genomics, Bioinformatics, Sequencing, Threatened Species Initiative, Galaxy Australia
WORKSHOP: Hybrid de novo genome assembly

This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021.

Workshop description

It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches...

Keywords: Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly

WORKSHOP: Hybrid de novo genome assembly https://dresa.org.au/materials/workshop-hybrid-de-novo-genome-assembly-714004ba-0348-47c8-a68f-038a1f8ccfb1 This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021. Workshop description It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches which enable research on organisms for which reference genomes were not previously available. These approaches combine the strengths of short (Illumina) and long (PacBio or Nanopore) read technologies, resulting in improved assembly quality. In this workshop we will learn how to create and assess genome assemblies from Illumina and Nanopore reads using data from a Bacillus Subtilis strain. We will demonstrate two hybrid-assembly methods using the tools Flye, Pilon, and Unicycler to perform assembly and subsequent error correction. You will learn how to visualise input read sets and the assemblies produced at each stage and assess the quality of the final assembly. All analyses will be performed using Galaxy Australia, an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. This workshop is presented by the Australian BioCommons and Melbourne Bioinformatics with the assistance of a network of facilitators from the national Bioinformatics Training Cooperative. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Schedule (PDF): A breakdown of the topics and timings for the workshop   Materials shared elsewhere: This workshop follows the tutorial ‘Hybrid genome assembly - Nanopore and Illumina’ developed by Melbourne Bioinformatics. https://www.melbournebioinformatics.org.au/tutorials/tutorials/hybrid_assembly/nanopore_assembly/ Melissa Burke (melissa@biocommons.org.au) Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly
CheckEM User Guide

CheckEM is an open-source web based application which provides quality control assessments on metadata and image annotations of fish stereo-imagery. It is available at marine-ecology.shinyapps.io/CheckEM. The application can assess a range of sampling methods and annotation data formats for...

Keywords: stereo-video, fish, annotation

CheckEM User Guide https://dresa.org.au/materials/checkem-user-guide CheckEM is an open-source web based application which provides quality control assessments on metadata and image annotations of fish stereo-imagery. It is available at marine-ecology.shinyapps.io/CheckEM. The application can assess a range of sampling methods and annotation data formats for common inaccuracies made whilst annotating stereo imagery. CheckEM creates interactive plots and tables in a graphical interface, and provides summarised data and a report of potential errors to download. brooke.gibbons@uwa.edu.au stereo-video, fish, annotation
EventMeasure Annotation Guide

EventMeasure annotation guide for baited remote underwater stereo video systems (stereo-BRUVs) for count and length

Keywords: fish, stereo-video, annotation

EventMeasure Annotation Guide https://dresa.org.au/materials/eventmeasure-annotation-guide EventMeasure annotation guide for baited remote underwater stereo video systems (stereo-BRUVs) for count and length tim.langlois@uwa.edu.au fish, stereo-video, annotation
Stereo-video workflows for fish and benthic ecologists

Stereo imagery is widely used by research institutions and management bodies around the world as a cost-effective and non-destructive method to research and monitor fish and habitats (Whitmarsh, Fairweather and Huveneers, 2017). Stereo-video can provide accurate and precise size and range...

Keywords: stereo-video, fish, sharks, habitats

Resource type: tutorial

Stereo-video workflows for fish and benthic ecologists https://dresa.org.au/materials/stereo-video-workflows-for-fish-and-benthic-ecologists Stereo imagery is widely used by research institutions and management bodies around the world as a cost-effective and non-destructive method to research and monitor fish and habitats (Whitmarsh, Fairweather and Huveneers, 2017). Stereo-video can provide accurate and precise size and range measurements and can be used to study spatial and temporal patterns in fish assemblages (McLean et al., 2016), habitat composition and complexity (Collins et al., 2017), behaviour (Goetze et al., 2017), responses to anthropogenic pressures (Bosch et al., 2022) and the recovery and growth of benthic fauna (Langlois et al. 2020). It is important that users of stereo-video collect, annotate, quality control and store their data in a consistent manner, to ensure data produced is of the highest quality possible and to enable large scale collaborations. Here we collate existing best practices and propose new tools to equip ecologists to ensure that all aspects of the stereo-video workflow are performed in a consistent way. tim.langlois@uwa.edu.au stereo-video, fish, sharks, habitats
WEBINAR: Here's one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia

This record includes training materials associated with the Australian BioCommons webinar ‘Here’s one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia’. This webinar took place on 26 October 2022.

Event description 

Have you discovered a...

Keywords: Bioinformatics, Workflows, FAIR, Galaxy Australia

WEBINAR: Here's one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia https://dresa.org.au/materials/webinar-here-s-one-we-prepared-earlier-re-creating-bioinformatics-methods-and-workflows-with-galaxy-australia This record includes training materials associated with the Australian BioCommons webinar ‘Here’s one we prepared earlier: (re)creating bioinformatics methods and workflows with Galaxy Australia’. This webinar took place on 26 October 2022. **Event description**  Have you discovered a brilliant bioinformatics workflow but you’re not quite sure how to use it? In this webinar we will introduce the power of Galaxy for construction and (re)use of reproducible workflows, whether building workflows from scratch, recreating them from published descriptions and/or extracting from Galaxy histories. Using an established bioinformatics method, we’ll show you how to: * Use the workflows creator in Galaxy Australia  * Build a workflow based on a published method * Annotate workflows so that you (and others) can understand them  * Make workflows finable and citable (important and very easy to do!) Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** * Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. * Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. * GalaxyWorkflows_Slides (PDF): A PDF copy of the slides presented during the webinar. **Materials shared elsewhere:** A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/IMkl6p7hkho Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Workflows, FAIR, Galaxy Australia
WEBINAR: Conservation genomics in the age of extinction

This record includes training materials associated with the Australian BioCommons webinar ‘Conservation genomics in the age of extinction’. This webinar took place on 8 March 2022.

Event description

Biodiversity is crashing and millions of plant and animal species are at the edge of...

Keywords: Conservation genomics, Genomics, Bioinformatics, Sequencing, Threatened Species Initiative, Galaxy Australia

WEBINAR: Conservation genomics in the age of extinction https://dresa.org.au/materials/webinar-conservation-genomics-in-the-age-of-extinction This record includes training materials associated with the Australian BioCommons webinar ‘Conservation genomics in the age of extinction’. This webinar took place on 8 March 2022. **Event description** Biodiversity is crashing and millions of plant and animal species are at the edge of extinction. Understanding the genetic diversity of these species is an important tool for conservation biology but obtaining high quality genomes for threatened species is not always straightforward. In this webinar Dr Carolyn Hogg speaks about the work she has been doing with the Threatened Species Initiative to build genomic resources to understand and protect Australia’s threatened species. Using examples such as the Kroombit Tinker Frog and the Greater Bilby, Carolyn describes some of the complexities and challenges of generating genomes from short reads and HiFi reads for critically endangered species. She outlines the technologies and resources being used and how these are bridging the gap between genomicists, bioinformaticians and conservation experts to help save Australian species. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. **Materials shared elsewhere:** A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/Bl7CaiGQ91s   Melissa Burke (melissa@biocommons.org.au) Conservation genomics, Genomics, Bioinformatics, Sequencing, Threatened Species Initiative, Galaxy Australia
WORKSHOP: Hybrid de novo genome assembly

This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021.

Workshop description

It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly...

Keywords: Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly

WORKSHOP: Hybrid de novo genome assembly https://dresa.org.au/materials/workshop-hybrid-de-novo-genome-assembly This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021. **Workshop description** It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches which enable research on organisms for which reference genomes were not previously available. These approaches combine the strengths of short (Illumina) and long (PacBio or Nanopore) read technologies, resulting in improved assembly quality. In this workshop we will learn how to create and assess genome assemblies from Illumina and Nanopore reads using data from a Bacillus Subtilis strain. We will demonstrate two hybrid-assembly methods using the tools Flye, Pilon, and Unicycler to perform assembly and subsequent error correction. You will learn how to visualise input read sets and the assemblies produced at each stage and assess the quality of the final assembly. All analyses will be performed using Galaxy Australia, an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. This workshop is presented by the Australian BioCommons and Melbourne Bioinformatics with the assistance of a network of facilitators from the national Bioinformatics Training Cooperative. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Schedule (PDF): A breakdown of the topics and timings for the workshop **Materials shared elsewhere:** This workshop follows the tutorial ‘Hybrid genome assembly - Nanopore and Illumina’ developed by Melbourne Bioinformatics. https://www.melbournebioinformatics.org.au/tutorials/tutorials/hybrid_assembly/nanopore_assembly/ Melissa Burke (melissa@biocommons.org.au) Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly
WORKSHOP: Online data analysis for biologists

This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021.

Workshop description

Galaxy is an online platform for biological research that allows people to use...

Keywords: Bioinformatics, Analysis, Workflows, Galaxy Australia

WORKSHOP: Online data analysis for biologists https://dresa.org.au/materials/workshop-online-data-analysis-for-biologists This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021. **Workshop description** Galaxy is an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. It is an open source, web-based platform for accessible, reproducible, and transparent computational biomedical research. It also captures run information so that workflows can be saved, repeated and shared efficiently via the web. This interactive beginners workshop will provide an introduction to the Galaxy interface, histories and available tools. The material covered in this workshop is freely available through the Galaxy Training Network. The workshop will be held via Zoom and involves a combination of presentations by the lead trainer and smaller breakout groups supported by experienced facilitators. The materials are shared under a Creative Commons 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Schedule (PDF): schedule for the workshop - Online_data_analysis_for_biologists_extraslides (PPTX and PDF): Slides used to introduce the data set and emphasise the importance of workflows. These slides were developed by Ms Grace Hall. **Materials shared elsewhere:** The tutorial used in this workshop is available via the Galaxy Training Network. Anne Fouilloux, Nadia Goué, Christopher Barnett, Michele Maroni, Olha Nahorna, Dave Clements, Saskia Hiltemann, 2021 Galaxy 101 for everyone (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/introduction/tutorials/galaxy-intro-101-everyone/tutorial.html Online; accessed Fri Dec 10 2021 Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Analysis, Workflows, Galaxy Australia
WEBINAR: Where to go when your bioinformatics outgrows your compute

This record includes training materials associated with the Australian BioCommons webinar ‘Where to go when your bioinformatics outgrows your compute’. This webinar took place on 19 August 2021.

Bioinformatics analyses are often complex, requiring multiple software tools and specialised...

Keywords: Computational Biology, Bioinformatics, High performance computing, HPC, Galaxy Australia, Nectar Research Cloud, Pawsey Supercomputing Centre, NCI, NCMAS, Cloud computing

WEBINAR: Where to go when your bioinformatics outgrows your compute https://dresa.org.au/materials/webinar-where-to-go-when-your-bioinformatics-outgrows-your-compute This record includes training materials associated with the Australian BioCommons webinar ‘Where to go when your bioinformatics outgrows your compute’. This webinar took place on 19 August 2021. Bioinformatics analyses are often complex, requiring multiple software tools and specialised compute resources. “I don’t know what compute resources I will need”, “My analysis won’t run and I don’t know why” and "Just getting it to work" are common pain points for researchers. In this webinar, you will learn how to understand the compute requirements for your bioinformatics workflows. You will also hear about ways of accessing compute that suits your needs as an Australian researcher, including Galaxy Australia, cloud and high-performance computing services offered by the Australian Research Data Commons, the National Compute Infrastructure (NCI) and Pawsey.  We also describe bioinformatics and computing support services available to Australian researchers.  This webinar was jointly organised with the Sydney Informatics Hub at the University of Sydney. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Where to go when your bioinformatics outgrows your compute - slides (PDF and PPTX): Slides presented during the webinar - Australian research computing resources cheat sheet (PDF): A list of resources and useful links mentioned during the webinar. **Materials shared elsewhere:** A recording of the webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/hNTbngSc-W0 Melissa Burke (melissa@biocommons.org.au) Computational Biology, Bioinformatics, High performance computing, HPC, Galaxy Australia, Nectar Research Cloud, Pawsey Supercomputing Centre, NCI, NCMAS, Cloud computing
Galaxy Training

Galaxy is a hosted web-accessible platform that lets you conduct accessible, reproducible, and transparent computational biological research. It is an international, community driven effort to make it easy for life scientists to analyse their data for free and without the need for programmatic...

Keywords: Galaxy Australia, Galaxy Project, Bioinformatics, Data analysis

Galaxy Training https://dresa.org.au/materials/galaxy-training Galaxy is a hosted web-accessible platform that lets you conduct accessible, reproducible, and transparent computational biological research. It is an international, community driven effort to make it easy for life scientists to analyse their data for free and without the need for programmatic skills. This is a collection of tutorials developed and maintained by the worldwide Galaxy community that show you how to analyse a variety of biological data using Galaxy. Melissa (melissa@biocommons.org.au) Galaxy Australia, Galaxy Project, Bioinformatics, Data analysis