1. Home
  2. Materials
Register training material
15 materials found

Authors: Dow, Ellen (orcid: 0000-000...  or Russell, Keith (orcid: 0000...  or Kalaš, Matúš (orcid: 0000-0...  or Hall, Grace (orcid: 0000-00... 

WORKSHOP: Online data analysis for biologists

This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021.

Workshop description

Galaxy is an online platform for biological research that allows people to use computational data...

Keywords: Bioinformatics, Analysis, Workflows, Galaxy Australia

WORKSHOP: Online data analysis for biologists https://dresa.org.au/materials/workshop-online-data-analysis-for-biologists-08d66913-4ce3-4528-bdd6-0b0fcf234982 This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021. Workshop description Galaxy is an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. It is an open source, web-based platform for accessible, reproducible, and transparent computational biomedical research. It also captures run information so that workflows can be saved, repeated and shared efficiently via the web. This interactive beginners workshop will provide an introduction to the Galaxy interface, histories and available tools. The material covered in this workshop is freely available through the Galaxy Training Network. The workshop will be held via Zoom and involves a combination of presentations by the lead trainer and smaller breakout groups supported by experienced facilitators. The materials are shared under a Creative Commons 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Schedule (PDF): schedule for the workshop Online_data_analysis_for_biologists_extraslides (PPTX and PDF): Slides used to introduce the data set and emphasise the importance of workflows. These slides were developed by Ms Grace Hall. Materials shared elsewhere: The tutorial used in this workshop is available via the Galaxy Training Network. Anne Fouilloux, Nadia Goué, Christopher Barnett, Michele Maroni, Olha Nahorna, Dave Clements, Saskia Hiltemann, 2021 Galaxy 101 for everyone (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/introduction/tutorials/galaxy-intro-101-everyone/tutorial.html Online; accessed Fri Dec 10 2021 Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Analysis, Workflows, Galaxy Australia
WEBINAR: KBase - A knowledge base for systems biology

This record includes training materials associated with the Australian BioCommons webinar ‘KBase - A knowledge base for systems biology’. This webinar took place on 22 September 2021.

Event description 

Developed for bench biologists and bioinformaticians, The Department of Energy Systems...

Keywords: Systems Biology, FAIR Research, Open Source Software, Metagenomics, Microbiology

WEBINAR: KBase - A knowledge base for systems biology https://dresa.org.au/materials/webinar-kbase-a-knowledge-base-for-systems-biology-653d9753-989d-4194-9230-6e2d90652955 This record includes training materials associated with the Australian BioCommons webinar ‘KBase - A knowledge base for systems biology’. This webinar took place on 22 September 2021. Event description  Developed for bench biologists and bioinformaticians, The Department of Energy Systems Biology Knowledgebase (KBase) is a free, open source, software and data science platform designed to meet the grand challenge of systems biology: predicting and designing biological function. This webinar will provide an overview of the KBase mission and user community, as well as a tour of the online platform and basic functionality. You’ll learn how KBase can support your research: Upload data, run analysis tools (Apps), share your analysis with collaborators, and publish your data and reproducible workflows. We’ll highlight a brand new feature that enables users to link environment and measurement data to sequencing data. You’ll also find out how KBase supports findable, accessible, interoperable, and reusable (FAIR) research by providing open, reproducible, shareable bioinformatics workflows. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Q&A for Australian BioCommons KBase Webinar [PDF]: Document containing answers to questions asked during the webinar and links to additional resources Introduction to KBase: Australian BioCommons Webinar [PDF]: Slides presented during the webinar Materials shared elsewhere: A recording of the webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/tJ94i9gOJfU The slides are also available as Google slides:  https://tinyurl.com/KBase-webinar-slides Melissa Burke (melissa@biocommons.org.au) Systems Biology, FAIR Research, Open Source Software, Metagenomics, Microbiology
WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software

This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022.

Event description 

bio.tools provides easy access to essential scientific...

Keywords: Bioinformatics, Research software, EDAM, Workflows, FAIR

WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software https://dresa.org.au/materials/webinar-bio-tools-making-it-easier-to-find-understand-and-cite-biological-tools-and-software-aea38c9e-0b40-4308-bafd-f7580563f520 This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022. Event description  bio.tools provides easy access to essential scientific and technical information about software, command-line tools, databases and services. It’s backed by ELIXIR, the European Infrastructure for Biological Information, and is being used in Australia to register software (e.g. Galaxy Australia, prokka). It underpins the information provided in the Australian BioCommons discovery service ToolFinder. Hans Ienasescu and Matúš Kalaš join us to explain how bio.tools uses a community driven, open science model to create this collection of resources and how it makes it easier to find, understand, utilise and cite them. They’ll delve into how bio.tools is using standard semantics (e.g. the EDAM ontology) and syntax (e.g. biotoolsSchema) to enrich the annotation and description of tools and resources. Finally, we’ll see how the community can contribute to bio.tools and take advantage of its key features to share and promote their own research software.   Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. biotools_EDAM_slides (PDF): A PDF copy of the slides presented during the webinar.   Materials shared elsewhere: A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/K0J4_bAUG3Y Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Research software, EDAM, Workflows, FAIR
WORKSHOP: Translating workflows into Nextflow with Janis

This record includes training materials associated with the Australian BioCommons workshop ‘Translating workflows into Nextflow with Janis’. This workshop took place online on 19 June 2023.

Event description

Bioinformatics workflows are critical for reproducibly transferring methodologies...

Keywords: Bioinformatics, Workflows, Nextflow, CWL, Galaxy

WORKSHOP: Translating workflows into Nextflow with Janis https://dresa.org.au/materials/workshop-translating-workflows-into-nextflow-with-janis-36386c6d-f9a2-4b4d-afa9-062ce3b8ac5d This record includes training materials associated with the Australian BioCommons workshop ‘Translating workflows into Nextflow with Janis’. This workshop took place online on 19 June 2023. Event description Bioinformatics workflows are critical for reproducibly transferring methodologies between research groups and for scaling between computational infrastructures. Research groups currently invest a lot of time and effort in creating and updating workflows; the ability to translate from one workflow language into another can make them easier to share, and maintain with minimal effort. For example, research groups that would like to run an existing Galaxy workflow on HPC, or extend it for their use, might find translating the workflow to Nextflow more suitable for their ongoing use-cases.  Janis is a framework that provides an abstraction layer for describing workflows, and a tool that can translate workflows between existing languages such as CWL, WDL, Galaxy and Nextflow. Janis aims to translate as much as it can, leaving the user to validate the workflow and make small manual adjustments where direct translations are not possible. Originating from the Portable Pipelines Project between Melbourne Bioinformatics, the Peter MacCallum Cancer Centre, and the Walter and Eliza Hall Institute of Medical Research, this tool is now available for everyone to use. This workshop provides an introduction to Janis and how it can be used to translate Galaxy and CWL based tools and workflows into Nextflow. Using hands-on examples we’ll step you through the process and demonstrate how to optimise, troubleshoot and test the translated workflows. This workshop event and accompanying materials were developed by the Melbourne Bioinformatics and the Peter MacCallum Cancer Centre. The workshop was enabled through the Australian BioCommons - Bring Your Own Data Platforms project funded by the Australian Research Data Commons and NCRIS via Bioplatforms Australia.    Materials Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Intro to Galaxy (PDF): Slides presented during the workshop Intro to CWL (PDF): Slides presented during the workshop Intro to the session & Janis (PDF): Slides presented during the workshop Janis_Schedule (PDF): Schedule for the workshop providing a breakdown of topics and timings Materials shared elsewhere: This workshop follows the accompanying training materials: https://www.melbournebioinformatics.org.au/tutorials/tutorials/janis_translate/janis_translate   A recording of the workshop is available on the Australian BioCommons YouTube channel: https://youtu.be/0IiY1GEx_BY Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Workflows, Nextflow, CWL, Galaxy
WORKSHOP: Hybrid de novo genome assembly

This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021.

Workshop description

It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches...

Keywords: Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly

WORKSHOP: Hybrid de novo genome assembly https://dresa.org.au/materials/workshop-hybrid-de-novo-genome-assembly-714004ba-0348-47c8-a68f-038a1f8ccfb1 This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021. Workshop description It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches which enable research on organisms for which reference genomes were not previously available. These approaches combine the strengths of short (Illumina) and long (PacBio or Nanopore) read technologies, resulting in improved assembly quality. In this workshop we will learn how to create and assess genome assemblies from Illumina and Nanopore reads using data from a Bacillus Subtilis strain. We will demonstrate two hybrid-assembly methods using the tools Flye, Pilon, and Unicycler to perform assembly and subsequent error correction. You will learn how to visualise input read sets and the assemblies produced at each stage and assess the quality of the final assembly. All analyses will be performed using Galaxy Australia, an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. This workshop is presented by the Australian BioCommons and Melbourne Bioinformatics with the assistance of a network of facilitators from the national Bioinformatics Training Cooperative. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Schedule (PDF): A breakdown of the topics and timings for the workshop   Materials shared elsewhere: This workshop follows the tutorial ‘Hybrid genome assembly - Nanopore and Illumina’ developed by Melbourne Bioinformatics. https://www.melbournebioinformatics.org.au/tutorials/tutorials/hybrid_assembly/nanopore_assembly/ Melissa Burke (melissa@biocommons.org.au) Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly
Setting The Scene

Opening Address for the ARDC Skills Summit 2023

This presentation provides a welcome to the ARDC Skills Summit 2023, and includes an outline of the importance of digital research skills to data-enriched research, the value of skills training and highly skilled research workforce to the broader...

Keywords: research, training, skills, training material, ARDC, research data commons, digital research skills agenda

Setting The Scene https://dresa.org.au/materials/setting-the-scene-8a535906-352b-451e-be82-051b1db4c5de Opening Address for the ARDC Skills Summit 2023 This presentation provides a welcome to the ARDC Skills Summit 2023, and includes an outline of the importance of digital research skills to data-enriched research, the value of skills training and highly skilled research workforce to the broader economy, and an overview of related ARDC activity. contact@ardc.edu.au research, training, skills, training material, ARDC, research data commons, digital research skills agenda
ARDC FAIR Data 101 self-guided

FAIR Data 101 v3.0 is a self-guided course covering the FAIR Data principles

The FAIR Data 101 virtual course was designed and delivered by the ARDC Skilled Workforce Program twice in 2020 and has now been reworked as a self-guided course.

The course structure was based on 'FAIR Data in the...

Keywords: training material, FAIR data, video, webinar, activities, quiz, FAIR, research data management

ARDC FAIR Data 101 self-guided https://dresa.org.au/materials/ardc-fair-data-101-self-guided-2d794a84-f0ff-4e11-a39c-fa8ea481e097 FAIR Data 101 v3.0 is a self-guided course covering the FAIR Data principles The FAIR Data 101 virtual course was designed and delivered by the ARDC Skilled Workforce Program twice in 2020 and has now been reworked as a self-guided course. The course structure was based on 'FAIR Data in the Scholarly Communications Lifecycle', run by Natasha Simons at the FORCE11 Scholarly Communications Institute. These training materials are hosted on GitHub. contact@ardc.edu.au training material, FAIR data, video, webinar, activities, quiz, FAIR, research data management
WORKSHOP: Translating workflows into Nextflow with Janis

This record includes training materials associated with the Australian BioCommons workshop ‘Translating workflows into Nextflow with Janis’. This workshop took place online on 19 June 2023.

Event description

Bioinformatics workflows are critical for reproducibly transferring methodologies...

Keywords: Bioinformatics, Workflows, Nextflow, CWL, Galaxy

WORKSHOP: Translating workflows into Nextflow with Janis https://dresa.org.au/materials/workshop-translating-workflows-into-nextflow-with-janis This record includes training materials associated with the Australian BioCommons workshop ‘Translating workflows into Nextflow with Janis’. This workshop took place online on 19 June 2023. Event description Bioinformatics workflows are critical for reproducibly transferring methodologies between research groups and for scaling between computational infrastructures. Research groups currently invest a lot of time and effort in creating and updating workflows; the ability to translate from one workflow language into another can make them easier to share, and maintain with minimal effort. For example, research groups that would like to run an existing Galaxy workflow on HPC, or extend it for their use, might find translating the workflow to Nextflow more suitable for their ongoing use-cases.  Janis is a framework that provides an abstraction layer for describing workflows, and a tool that can translate workflows between existing languages such as CWL, WDL, Galaxy and Nextflow. Janis aims to translate as much as it can, leaving the user to validate the workflow and make small manual adjustments where direct translations are not possible. Originating from the Portable Pipelines Project between Melbourne Bioinformatics, the Peter MacCallum Cancer Centre, and the Walter and Eliza Hall Institute of Medical Research, this tool is now available for everyone to use. This workshop provides an introduction to Janis and how it can be used to translate Galaxy and CWL based tools and workflows into Nextflow. Using hands-on examples we’ll step you through the process and demonstrate how to optimise, troubleshoot and test the translated workflows. This workshop event and accompanying materials were developed by the Melbourne Bioinformatics and the Peter MacCallum Cancer Centre. The workshop was enabled through the Australian BioCommons - Bring Your Own Data Platforms project funded by the Australian Research Data Commons and NCRIS via Bioplatforms Australia.    Materials Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. Intro to Galaxy (PDF): Slides presented during the workshop Intro to CWL (PDF): Slides presented during the workshop Intro to the session & Janis (PDF): Slides presented during the workshop Janis_Schedule (PDF): Schedule for the workshop providing a breakdown of topics and timings Materials shared elsewhere: This workshop follows the accompanying training materials: https://www.melbournebioinformatics.org.au/tutorials/tutorials/janis_translate/janis_translate   A recording of the workshop is available on the Australian BioCommons YouTube channel: https://youtu.be/0IiY1GEx_BY Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Workflows, Nextflow, CWL, Galaxy
Setting The Scene

Opening Address for the ARDC Skills Summit 2023

This presentation provides a welcome to the ARDC Skills Summit 2023, and includes an outline of the importance of digital research skills to data-enriched research, the value of skills training and highly skilled research workforce to the broader...

Keywords: research, training, skills, training material, ARDC, research data commons, digital research skills agenda

Setting The Scene https://dresa.org.au/materials/setting-the-scene Opening Address for the ARDC Skills Summit 2023 This presentation provides a welcome to the ARDC Skills Summit 2023, and includes an outline of the importance of digital research skills to data-enriched research, the value of skills training and highly skilled research workforce to the broader economy, and an overview of related ARDC activity. contact@ardc.edu.au research, training, skills, training material, ARDC, research data commons, digital research skills agenda
WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software

This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022.

Event description

bio.tools provides easy access to essential...

Keywords: Bioinformatics, Research software, EDAM, Workflows, FAIR

WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software https://dresa.org.au/materials/webinar-bio-tools-making-it-easier-to-find-understand-and-cite-biological-tools-and-software-9180e32a-f4f5-4993-a90a-a9bfcfafd4f3 This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022. **Event description** bio.tools provides easy access to essential scientific and technical information about software, command-line tools, databases and services. It’s backed by ELIXIR, the European Infrastructure for Biological Information, and is being used in Australia to register software (e.g. Galaxy Australia, prokka). It underpins the information provided in the Australian BioCommons discovery service ToolFinder. Hans Ienasescu and Matúš Kalaš join us to explain how bio.tools uses a community driven, open science model to create this collection of resources and how it makes it easier to find, understand, utilise and cite them. They’ll delve into how bio.tools is using standard semantics (e.g. the EDAM ontology) and syntax (e.g. biotoolsSchema) to enrich the annotation and description of tools and resources. Finally, we’ll see how the community can contribute to bio.tools and take advantage of its key features to share and promote their own research software.   Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. Files and materials included in this record: * Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. * Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. * biotools_EDAM_slides (PDF): A PDF copy of the slides presented during the webinar. Materials shared elsewhere: A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/K0J4_bAUG3Y Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Research software, EDAM, Workflows, FAIR
WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software

This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022.

Event description

bio.tools provides easy access to essential...

Keywords: Bioinformatics, Research software, EDAM, Workflows, FAIR

WEBINAR: bio.tools - making it easier to find, understand and cite biological tools and software https://dresa.org.au/materials/webinar-bio-tools-making-it-easier-to-find-understand-and-cite-biological-tools-and-software This record includes training materials associated with the Australian BioCommons webinar ‘bio.tools - making it easier to find, understand and cite biological tools and software’. This webinar took place on 21 June 2022. **Event description** bio.tools provides easy access to essential scientific and technical information about software, command-line tools, databases and services. It’s backed by ELIXIR, the European Infrastructure for Biological Information, and is being used in Australia to register software (e.g. Galaxy Australia, prokka). It underpins the information provided in the Australian BioCommons discovery service ToolFinder. Hans Ienasescu and Matúš Kalaš join us to explain how bio.tools uses a community driven, open science model to create this collection of resources and how it makes it easier to find, understand, utilise and cite them. They’ll delve into how bio.tools is using standard semantics (e.g. the EDAM ontology) and syntax (e.g. biotoolsSchema) to enrich the annotation and description of tools and resources. Finally, we’ll see how the community can contribute to bio.tools and take advantage of its key features to share and promote their own research software.   Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - biotools_EDAM_slides (PDF): A PDF copy of the slides presented during the webinar. **Materials shared elsewhere:** A recording of this webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/K0J4_bAUG3Y Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Research software, EDAM, Workflows, FAIR
WORKSHOP: Hybrid de novo genome assembly

This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021.

Workshop description

It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly...

Keywords: Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly

WORKSHOP: Hybrid de novo genome assembly https://dresa.org.au/materials/workshop-hybrid-de-novo-genome-assembly This record includes training materials associated with the Australian BioCommons workshop ‘Hybrid de novo genome assembly’. This workshop took place on 7 October 2021. **Workshop description** It’s now easier than ever to assemble new reference genomes thanks to hybrid genome assembly approaches which enable research on organisms for which reference genomes were not previously available. These approaches combine the strengths of short (Illumina) and long (PacBio or Nanopore) read technologies, resulting in improved assembly quality. In this workshop we will learn how to create and assess genome assemblies from Illumina and Nanopore reads using data from a Bacillus Subtilis strain. We will demonstrate two hybrid-assembly methods using the tools Flye, Pilon, and Unicycler to perform assembly and subsequent error correction. You will learn how to visualise input read sets and the assemblies produced at each stage and assess the quality of the final assembly. All analyses will be performed using Galaxy Australia, an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. This workshop is presented by the Australian BioCommons and Melbourne Bioinformatics with the assistance of a network of facilitators from the national Bioinformatics Training Cooperative. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Schedule (PDF): A breakdown of the topics and timings for the workshop **Materials shared elsewhere:** This workshop follows the tutorial ‘Hybrid genome assembly - Nanopore and Illumina’ developed by Melbourne Bioinformatics. https://www.melbournebioinformatics.org.au/tutorials/tutorials/hybrid_assembly/nanopore_assembly/ Melissa Burke (melissa@biocommons.org.au) Galaxy Australia, Bioinformatics, Analysis, Workflows, Genomics, Genome assembly, De novo assembly
WORKSHOP: Online data analysis for biologists

This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021.

Workshop description

Galaxy is an online platform for biological research that allows people to use...

Keywords: Bioinformatics, Analysis, Workflows, Galaxy Australia

WORKSHOP: Online data analysis for biologists https://dresa.org.au/materials/workshop-online-data-analysis-for-biologists This record includes training materials associated with the Australian BioCommons workshop ‘Online data analysis for biologists’. This workshop took place on 9 September 2021. **Workshop description** Galaxy is an online platform for biological research that allows people to use computational data analysis tools and workflows without the need for programming experience. It is an open source, web-based platform for accessible, reproducible, and transparent computational biomedical research. It also captures run information so that workflows can be saved, repeated and shared efficiently via the web. This interactive beginners workshop will provide an introduction to the Galaxy interface, histories and available tools. The material covered in this workshop is freely available through the Galaxy Training Network. The workshop will be held via Zoom and involves a combination of presentations by the lead trainer and smaller breakout groups supported by experienced facilitators. The materials are shared under a Creative Commons 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Schedule (PDF): schedule for the workshop - Online_data_analysis_for_biologists_extraslides (PPTX and PDF): Slides used to introduce the data set and emphasise the importance of workflows. These slides were developed by Ms Grace Hall. **Materials shared elsewhere:** The tutorial used in this workshop is available via the Galaxy Training Network. Anne Fouilloux, Nadia Goué, Christopher Barnett, Michele Maroni, Olha Nahorna, Dave Clements, Saskia Hiltemann, 2021 Galaxy 101 for everyone (Galaxy Training Materials). https://training.galaxyproject.org/training-material/topics/introduction/tutorials/galaxy-intro-101-everyone/tutorial.html Online; accessed Fri Dec 10 2021 Melissa Burke (melissa@biocommons.org.au) Bioinformatics, Analysis, Workflows, Galaxy Australia
WEBINAR: KBase - A knowledge base for systems biology

This record includes training materials associated with the Australian BioCommons webinar ‘KBase - A knowledge base for systems biology’. This webinar took place on 22 September 2021.

Event description

Developed for bench biologists and bioinformaticians, The Department of Energy...

Keywords: Systems Biology, FAIR Research, Open Source Software, Metagenomics, Microbiology

WEBINAR: KBase - A knowledge base for systems biology https://dresa.org.au/materials/webinar-kbase-a-knowledge-base-for-systems-biology This record includes training materials associated with the Australian BioCommons webinar ‘KBase - A knowledge base for systems biology’. This webinar took place on 22 September 2021. **Event description** Developed for bench biologists and bioinformaticians, The Department of Energy Systems Biology Knowledgebase (KBase) is a free, open source, software and data science platform designed to meet the grand challenge of systems biology: predicting and designing biological function. This webinar will provide an overview of the KBase mission and user community, as well as a tour of the online platform and basic functionality. You’ll learn how KBase can support your research: Upload data, run analysis tools (Apps), share your analysis with collaborators, and publish your data and reproducible workflows. We’ll highlight a brand new feature that enables users to link environment and measurement data to sequencing data. You’ll also find out how KBase supports findable, accessible, interoperable, and reusable (FAIR) research by providing open, reproducible, shareable bioinformatics workflows. Materials are shared under a Creative Commons Attribution 4.0 International agreement unless otherwise specified and were current at the time of the event. **Files and materials included in this record:** - Event metadata (PDF): Information about the event including, description, event URL, learning objectives, prerequisites, technical requirements etc. - Index of training materials (PDF): List and description of all materials associated with this event including the name, format, location and a brief description of each file. - Q&A for Australian BioCommons KBase Webinar [PDF]: Document containing answers to questions asked during the webinar and links to additional resources - Introduction to KBase: Australian BioCommons Webinar [PDF]: Slides presented during the webinar **Materials shared elsewhere:** A recording of the webinar is available on the Australian BioCommons YouTube Channel: https://youtu.be/tJ94i9gOJfU The slides are also available as Google slides:  https://tinyurl.com/KBase-webinar-slides Melissa Burke (melissa@biocommons.org.au) Systems Biology, FAIR Research, Open Source Software, Metagenomics, Microbiology
ARDC FAIR Data 101 self-guided

FAIR Data 101 v3.0 is a self-guided course covering the FAIR Data principles

The FAIR Data 101 virtual course was designed and delivered by the ARDC Skilled Workforce Program twice in 2020 and has now been reworked as a self-guided course.

The course structure was based on 'FAIR Data in the...

Keywords: training material, FAIR data, video, webinar, activities, quiz, FAIR, research data management

ARDC FAIR Data 101 self-guided https://dresa.org.au/materials/ardc-fair-data-101-self-guided-bba41a59-8479-4f4f-b9ee-337b9eb294bf FAIR Data 101 v3.0 is a self-guided course covering the FAIR Data principles The FAIR Data 101 virtual course was designed and delivered by the ARDC Skilled Workforce Program twice in 2020 and has now been reworked as a self-guided course. The course structure was based on 'FAIR Data in the Scholarly Communications Lifecycle', run by Natasha Simons at the FORCE11 Scholarly Communications Institute. These training materials are hosted on GitHub. contact@ardc.edu.au training material, FAIR data, video, webinar, activities, quiz, FAIR, research data management